Actions

::Lubrication

::concepts

Bearing::surfaces    Which::between    Solid::pressure    Contact::fluid    Called::liquid    Motion::regime

Lubrication of the ship steam engine crankshaft. The two bottles of lubricant are attached to the piston and move while the engine is operating.

Lubrication is the process or technique employed to reduce friction between, and wear of one or both, surfaces in close proximity and moving relative to each other, by interposing a substance called a lubricant between them. The lubricant can be a solid, (e.g. Molybdenum disulfide MoS2)<ref>http://www.engineersedge.com/lubrication/applications_solid_lubrication.htm – 14k</ref> a solid/liquid dispersion, a liquid such as oil or water, a liquid-liquid dispersion (a grease) or a gas.

With fluid lubricants the applied load is either carried by pressure generated within the liquid the due to the frictional viscous resistance to motion of the lubricating fluid between the surfaces, or by the liquid being pumped under pressure between the surfaces.

Lubrication can also describe the phenomenon where reduction of friction occurs unintentionally, which can be hazardous such as hydroplaning on a road.

The science of friction, lubrication and wear is called tribology.

Adequate lubrication allows smooth continuous operation of equipment, reduces the rate of wear, and prevents excessive stresses or seizures at bearings. When lubrication breaks down, components can rub destructively against each other, causing heat, local welding, destructive damage and failure.


Lubrication sections
Intro  The regimes of lubrication  See also  References   External links   

PREVIOUS: IntroNEXT: The regimes of lubrication
<<>>