::Integrated circuit


Circuit::circuits    First::title    Silicon::devices    Which::process    Design::chips    Intel::layers

{{#invoke:redirect hatnote|redirect}} {{#invoke:redirect hatnote|redirect}} {{ safesubst:#invoke:Unsubst||$N=Use dmy dates |date=__DATE__ |$B= }}

Erasable programmable read-only memory integrated circuits. These packages have a transparent window that shows the die inside. The window allows the memory to be erased by exposing the chip to ultraviolet light.
Integrated circuit from an EPROM memory microchip showing the memory blocks, the supporting circuitry and the fine silver wires which connect the integrated circuit die to the legs of the packaging.
Synthetic detail of an integrated circuit through four layers of planarized copper interconnect, down to the polysilicon (pink), wells (greyish), and substrate (green)

An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is a set of electronic circuits on one small plate ("chip") of semiconductor material, normally silicon. This can be made much smaller than a discrete circuit made from independent electronic components. ICs can be made very compact, having up to several billion transistors and other electronic components in an area the size of a fingernail. The width of each conducting line in a circuit can be made smaller and smaller as the technology advances; in 2008 it dropped below 100 nanometers,<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> and has now been reduced to tens of nanometers.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

ICs were made possible by experimental discoveries showing that semiconductor devices could perform the functions of vacuum tubes and by mid-20th-century technology advancements in semiconductor device fabrication. The integration of large numbers of tiny transistors into a small chip was an enormous improvement over the manual assembly of circuits using discrete electronic components. The integrated circuit's mass production capability, reliability and building-block approach to circuit design ensured the rapid adoption of standardized integrated circuits in place of designs using discrete transistors.

ICs have two main advantages over discrete circuits: cost and performance. Cost is low because the chips, with all their components, are printed as a unit by photolithography rather than being constructed one transistor at a time. Furthermore, packaged ICs use much less material than discrete circuits. Performance is high because the IC's components switch quickly and consume little power (compared to their discrete counterparts) as a result of the small size and close proximity of the components. As of 2012, typical chip areas range from a few square millimeters to around 450 mm2, with up to 9 million transistors per mm2.

Integrated circuits are used in virtually all electronic equipment today and have revolutionized the world of electronics. Computers, mobile phones, and other digital home appliances are now inextricable parts of the structure of modern societies, made possible by the low cost of integrated circuits.

Integrated circuit sections
Intro   Terminology    Invention    Generations    Advances in integrated circuits    Classification    Manufacturing    Intellectual property    Other developments    Silicon labelling and graffiti    ICs and IC families    See also    References    Further reading   [[Integrated_circuit?section=</a>_External_links_|</a> External links ]]  

PREVIOUS: IntroNEXT: Terminology